TRE-DUO
Prices starting at $5,000

Standard Features:
Tracking: 864 channels: all-in-view satellite tracking on 2 antennas, GPS L1/L2/L2C/L5, Galileo E1/E5A/E5B/AltBoc, GLONASS L1/L2/L3, BeiDou B1/B2, QZSS L1/L2/L5, KFK WAAS/EGNOS (SBAS), Spectrum Data Output, Spoofing Detection, Advanced Multipath Reduction, Fast acquisition channels
Data: 20 Hz update rate for heading determination, RTK and raw data (code and carrier), Hardware Viterbi decoder, RTCM SC104 versions 2.x and 3.x Input/Output, NMEA 0183 versions 2.x and 3.0 Output, Code Differential Rover, Code Differential Base, Geoid and Magnetic Variation models, RAIM, Different DATUMs support, Output of grid coordinates, IEEE 1588 Master Clock, 16 GB of onboard memory for data storage
I/O: Two high speed RS232 serial ports (up to 460.8 Kbps), Two high speed configurable RS232/RS422 serial ports (up to 460.8 Kbps), High speed USB 2.0 device port (480 Mbps), Full-duplex 10BASE-T/100BASE-TX Ethernet port, Two CAN 2.0 A/B ports, IRIG timecode output, Two 1-PPS outputs synchronized to GPS, GLONASS or UTC, Two Event Marker inputs, MinPad interface: Four external LED drivers, ON/OFF control and External Command inputs, Four Configurable Logic-Level GPIO ports
Optional Features:
Data: 100 Hz Update Rate, 50 Hz heading determination & RTK Rate



Specifications:

Physical

  • Dimensions: 100x120 mm
  • Weight: 120 g
  • Digital connector: 64-pin DIN41612 type B Right Angle, AMP p/n 536052-5
  • RF connectors: MMCX Jack, edge mount, AMPHENOL, p/n 908-2210

Electrical

  • On-board power supply accepts any unregulated voltage between +6.0 to +40 Volts
  • The central pin of the antenna connector outputs +5 VDC to power LNA. The sourced current is 0.12A max.
  • Power consumption: 4.3 W typ

Environmental

  • Operating Temperature: -40°C to +75°C
  • Storage Temperature: -40°C to +85°C
  • High shock and vibration resistance